Skip to content

Unit: Commercial vinyl

LMFFL3302A: Install commercial vinyl floor coverings
LMFFL3303A: Install resilient floor coverings using custom designs and decorative finishes

Section 2: General laying techniques



Your trainer may ask you to complete this assignment as one of the assessment requirements for this unit. For more information about the assessment process and advice on what to do if you need help with your reading and writing, click on the link below.


Assessment requirements



  1. What on-site conditions can affect the duration of an adhesive's open time and working time? Name three factors.

  2. List three things that can go wrong with an installation due to an adhesive problem. For each one, answer the following questions:

    1. How has the problem affected the finished floor (that is, what has it done to the floor, or what does it look like)?


    2. What is the cause of the problem?


    3. How would you avoid this problem (what extra precautions could you take, or how would you vary the installation process)?


  3. List three things that can go wrong with a heat weld. For each problem, answer the following questions:

    1. What effect does the problem have on the finished weld?


    2. What is the cause of the problem?


    3. How would you avoid this problem?


  4. What advice would you give to the client about protecting their new floor immediately after installation?



Doc (420 KB) General laying techniques Assignment template

Click on the link above to go to the Word document you will need to complete. You should fill in your answers on-screen and then either:

  • print out a hard copy to send to your trainer by post

  • save the file electronically to submit to your trainer as an email attachment.