Skip to content

Unit: Inspecting and testing subfloors

LMFFL2004A: Moisture test timber and concrete floors
LMFFL3101A: Inspect sub-floors

Section 3: Inspecting subfloors


Just for fun

Audio for slide 1 (mp3 |6|KB)

In this section we talked about the minimum clearance requirements between the ground and the underside of a subfloor, as set out in AS 3660. In the case of a timber-framed subfloor, the ground clearance is measured from the underside of the bearer.

Can you remember what the specifications are?

See if you can fill in the spaces below with the correct terms and measurements. Click on the answer first and then click in the space it belongs to.

hearing icon